Hohm Tech Work 2 18650 Battery 2547mAh 35.8A

  • Ex Tax: $9.59
  • Product Code: M00000162
  • Availability: In Stock

Say hello to the successor of the Hohm Work 18650…we proudly introduce the updated Hohm Work2. Phenomenal sustained amperage and voltage delivery under heavy load in a 18650 cell. These are rated by Indonesia Chemistry at 2547mAh capacity, with a CDR of 25.3A, and 80oC | 2.8V cut-off @ 35.8A. For EV..

$9.59

Say hello to the successor of the Hohm Work 18650…we proudly introduce the updated Hohm Work2. Phenomenal sustained amperage and voltage delivery under heavy load in a 18650 cell. These are rated by Indonesia Chemistry at 2547mAh capacity, with a CDR of 25.3A, and 80oC | 2.8V cut-off @ 35.8A. For EV and DC motor applications, easily initial power with its 42.4A pulse/peak rating*6. All ratings are subject to meet and/or exceed strict limitation policies set forth for DLr*1, TID*2, PVDL*3, CLR*4 m?R*5, and Temperature (°C). Hohm Work2 is built with a Cobalt Oxide with proprietary melding of copper, aluminum, ethylene carbonate chemistry concentration, to achieve unprecedented capabilities.

Every Hohm Tech cell model has been tested and certified by UN38.3, EN62133, IEC62133 2nd Edition, and UL1642 accredited laboratories and testing facilities assigned by regulatory bodies.  This includes MSDS, CE, ROHS, UN38.3, IEC, Specifications, and Air/Sea Transport certifications.  We do not cut corners. We deliver what we promise… chart topping performance, capacity, consistency, and safety.

These cells are built specifically for intense & power-hungry devices that require consistent amperage delivery to operate as intended. Not only was power & capacity a priority, but safety measures were at the forefront of it all.


Capacity: 2547mAh
Max Charge Rate: 3.82A
Max Charge Voltage: 4.2V
Continuous Discharge Rate: 25.3A
Max 80oC | 3.2V cut-off: 35.8A
Pulse | Peak6: 42.4A
Cycle Life Retention: 500 Cycles (69%), 1000 (58%)
Chemistry Type: QSP Li-NMC


To expound on safety:

Modified cathode tag consisting of higher purity aluminum (UHP Al) is utilized to aid in lowering internal resistance.
Updated poly seal with refined bitumen is installed in every cell to ensure excess pressure is controlled.


* NOTICE: Hohm Tech does not manufacture batteries. These are made for and licensed to Hohm Tech Int’l achieving their requirements set forth.

** CAN BE CHARGED AT 3.82A. This is not a misprint. 3.82A as in THREE POINT EIGHT TWO amp charging is possible, tested, proven, and approved within all strict safety protocols set by Indonesia Chemistry.

*** TESTING BEYOND TEMPERATURE. Hohm Tech cells utilize both static & dynamic testing that includes but not limited to: density loss, thermal distribution, volt drop limiters, cycle life retention, internal resistance spread pre|post, and temperature. These tests are imperative to achieve true cell performance, longevity, and overall quality.

1. Density Loss Ratio
2. Thermal Image Distribution
3. Pulse Voltage Drop Limitation
4. Cycle Life Retention
5. Resistance Retentivity Pre/Post
6. Pulse & Peak is applicable to Dynamic EV Systems @ 5 SEC ON / 30 SEC OFF



WARNING: LI-ION CELLS HAVE INHERENT RISKS IF MISUSED OR MISHANDLED.   CELL CAN EXPLODE CAUSING SEVERE BURN INJURY, FATALITY, AND PROPERTY DAMAGE.


CELL = BATTERY

  • KEEP OUT OF REACH of anyone under 18 years of age, AND pets.
  • DO NOT PUT IN FIRE, oven, microwave, or expose to anything over 100oC (212oF)
  • DO NOT  CARRY or store OUTSIDE of its protective packaging or a PROTECTIVE CELL CASE.
  • DO NOT PUT IN POCKET, bag, purse, or anywhere WITH METAL OBJECTS including COINS and KEYS.  Cell needs to be in protective packaging or case at all times when not in use.  Otherwise, cell(s) could short-circuit and explode.
  • DO NOT PUT A DEVICE WITH CELL(S) INSTALLED IN POCKET or ON YOUR BODY. As unlikely as it may be, a device can malfunction, have a defect, internal damage, and/or be affected by conductive debris or object(s) in pocket that can overload or short-circuit cell causing it to explode.
  • DO NOT USE IN A DEVICE THAT CAN EXCEED MAX CELL WATTAGE (W) or AMPERAGE (A) (listed on each cell and retail packaging).  Otherwise, this can overload a cell, causing it to explode.
  • DO NOT USE A LOWER RESISTANCE (?) # (listed on each cell and retail packaging).  Otherwise, this can overload cell, causing it to explode.
  • DO NOT USE CELL WITH ANY DAMAGE TO ITS STRUCTURE OR OUTER PROTECTIVE LABEL (also called “WRAP”, “sleeve”, “skin”). Damage may include: dent(s), tear(s), nick(s), puncture(s), corrosion, or any other undisclosed abnormalities or damages.  Otherwise, a cell can short-circuit and explode. ALWAYS INSPECT cell VISUALLY and by TOUCH to SEE/FEEL for damage BEFORE EACH USE. ** SEE ILLUSTRATION BELOW AS GUIDELINE. **
  • DO NOT LEAVE UNATTENDED WHILE CHARGING, & REMOVE CELL(s) FROM CHARGER ONCE FULLY CHARGED to ensure it is not exposed to any potential charger malfunction such as overcharging which could damage cell causing it to explode.
  • DO NOT CHARGE HIGHER THAN MAX CHARGE VOLTAGE (V) (typically 4.2V) or DISCHARGE BELOW MAX VOLTAGE CUT-OFF (V) (typically 2.5V).  Overcharging or over-discharging cell(s) can cause irreversible damage and cause it to explode.
  • DO NOT MIX WITH USED or DIFFERENT BATTERY TYPES. Differences in cell capacity can lead to one or more cell(s) being overcharged or over-discharged. 
  • IF USING A MULTI-CELL DEVICE, the device MUST HAVE A NON-CONDUCTIVE BARRIER (typically plastic) OR FITMENT that PREVENTS CELL(S) from TOUCHING THE SIDE(S) OF ONE ANOTHER OR ANY ADJACENT METAL except for the very center of top and bottom of the cell. Otherwise, cell(s) could short-circuit and explode.
  • ALWAYS replace cell when capacity is decreased, up to a maximum of 12 months (1 year) when used in a removable-battery device (any device that cell can be removed).  Otherwise, cell degradation and wear incurred from repeated removal/installation can impede safety and subject cell to being short-circuited causing it to explode.
  • ALWAYS use, connect, charge, and operate cell(s) within their capabilities as listed on each cell, packaging, and product detail pages, while adhering to the device’s user manual.
  • COMPLETELY READ and follow the WARNING section listed on each cell, packaging, and here, in its entirety.
  • SEARCH www.YouTube.com for “18650 EXPLOSIONS” to understand the importance of consistently taking safety precautions and using Li-ion cells properly.  Hohm Tech advocates recycling and replacing any damaged Li-ion cell/battery. Or visit Hohm Tech Warranty Center for recycling and replacement.  Your safety is #1.



THIS PRODUCT CONTAINS NICOTINE, WHICH IS A HIGHLY ADDICTIVE SUBSTANCE.

Nicotine strength explained:

Different nicotine strength displays: 

You may see eLiquid strengths written as mg, mg/mL, or in percentage form. Here is how they are displayed in each:

     0mg = 0mg/mL = 0% Nicotine
     1.5mg =1.5mg/ml = 0.15% Nicotine
     3mg = 3mg/mL = 0.3% Nicotine
     6mg = 6mg/mL = 0.6% Nicotine
     12mg = 12mg/mL = 1.2% Nicotine
     18mg = 18mg/mL = 1.8% Nicotine
     20mg = 20mg/mL = 2.0% Nicotine

     

Contains: Vegetable Glycerol, Propylene Glycol, Nicotine, Other Flavourings. Can contain traces of allergens.

Diacetyl, Acetoin and Acetyl Propionyl free. 

Diethylene glycol free.

Not for use by people under 18 years old, Non-smokers, Pregnant, Nursing, People with cardiovascular conditions, Diabetes, Asthma or people sensitive to content.

Adverse effects: Headache, Dizziness, Dryness in mouth, Nose, Throat.

 

Warning: Harmful if swallowed

Keep out of reach of children. Wash hands thoroughly after handling. IF SWALLOWED: immediately call a POISON CENTRE or doctor/physician. Rinse mouth. Dispose of container in accordance with local regulations. 

Dispose of contents/container to by handing over to the person authorised to dispose of waste.

Can contain traces of allergens.


Write a review

Note: HTML is not translated!
    Bad           Good